I have areas taller than 2m that I want to panel. How can I install panels in these spaces?Updated 3 months ago

If our 2.6m length panels, such as No. 204 Ripple and No. 205 Track, don't align with your design preferences, you can still panel areas taller than 2m with ease. 

Here's how:

1. Apply the first full-length panel: Start by applying the first full-length panel to the wall using DecoFix Power - No.700 adhesive. Ensure it's securely attached to the wall surface.

2. Measure the remaining length: After installing the first panel, measure the remaining length of the wall where additional panels will be placed.

3. Cut the panel to size: Using your measurements, mark where you need to cut the panel to fit the remaining space. Carefully cut the panel to the appropriate size.

4. Apply adhesive: Apply DecoFix Power - No.700 adhesive to the back of the second panel and DecoFix Ultra - No.400 adhesive along the edge where it will meet the panel already on the wall.

5. Place the second panel: Position the second panel above the first panel, aligning it carefully with the edge of the first panel. Press firmly to ensure a strong bond between the panels.

6. Remove excess adhesive: After placing the second panel, remove any excess DecoFix adhesive to achieve a clean and professional finish.

By following these steps, you can easily panel areas taller than 2m using our high-quality adhesive products and ensure a seamless installation that meets your design requirements.